TorqueSpec Database

1993-2006 Nissan Altima Torque Specs | Engine, Brakes & More

On this page are all of the torque specifications you need for a Nissan Altima, all models from 1993 – 2006.

If you need a quick reference to a specific torque spec, utilize the Quick Jump feature above to get to the category you need. Some categories have “Popular Torque Specs” to make finding what you need a breeze!

NEW! Car Maintenance Tracker – Never forget when you did the last maintenance task!

add to google drive
printable scheduler

Quick Jump

Brakes

  • Brake Booster-to-Body Mounting Bolts: 108-144 inch-pounds
  • Brake Caliper Mounting Bolts:
    • Front Caliper: 16 – 23 ft. lbs.
    • Rear Caliper:
      • 1993 – 2001 models: 16-23 ft. lbs.
      • 2002 – 2004 models: 23-30 ft. lbs.
      • 2005 – 2006 models: 25-35 ft. lbs.
    • Torque Plate Bolts:
      • Front:
        • 1993 – 2004 models: 53-72 ft. lbs.
        • 2005 – 2006 models:
          • CLZ25VD: 53-72 ft. lbs.
          • CLZ25VE: 101-129 ft. lbs.
      • Rear:
        • 1993 – 2004 models: 28-36 ft. lbs.
        • 2005 – 2006 models: 116-144 ft. lbs.
  • Brake Hose-to-Caliper Banjo Bolt: 144-168 inch-pounds
  • Caliper and Wheel Cylinder Bleeder Screws: 61-78 inch-pounds
  • Master Cylinder-to-Brake Booster Retaining Nuts:
    • 1993 – 1995 models: 70-96 inch-pounds
    • 1996 – 2006 models: 108-132 inch-pounds
  • Wheel Cylinder Retaining Bolts: 52-95 inch-pounds

Engine (2.4L & 2.5L four-cylinder)

Quick Jump

Popular Torque Specs

Oil Drain Plug: 22-29 ft. lbs.
Oil Filter: Hand Tight
Transmission Drain Plug: 8 ft. lbs.
Wheel Lug Nuts: 72-87 ft. lbs.
Spark Plugs: 14-22 ft. lbs.

Camshaft

  • Camshaft Bearing Cap Bolts:
    • 2.4L engine:
      • Step 1: 17 inch-pounds
      • Step 2: 80-104 inch-pounds
    • 2.5L engine:
      • Step 1 (bolts 9-11): 17 inch-pounds
      • Step 2 (bolts 1-8): 17 inch-pounds
      • Step 3 (bolts 1-11): 52 inch-pounds
      • Step 4 (bolts 1-11): 80-104 inch-pounds
  • Camshaft Sprocket Bolt:
    • 2.4L engine: 123-130 ft. lbs.
    • 2.5L engine: 95-114 ft. lbs.
  • Camshaft Sprocket Cover (2.4L engine):
    • Small bolts: 57-66 inch-pounds
    • Large bolts: 144-168 inch-pounds

Clutch

  • Clutch Master Cylinder Retaining Nuts:
    • 1993 – 2001 models: 72-96 inch-pounds
    • 2002 – 2006 models: 108-144 inch-pounds
  • Clutch Release Cylinder Retaining Bolts: 22-30 ft. lbs.
  • Clutch Release Cylinder Bleeder Screw: 51-86 inch-pounds
  • Clutch Pressure Plate-to-Flywheel Bolts:
    • 1993 – 2001 models: 16-22 ft. lbs.
    • 2002 – 2006 models:
      • Step 1: 84-168 inch-pounds
      • Step 2: 26-32 ft. lbs.

Crankshaft

  • Crankshaft Pulley-to-Crankshaft Bolt:
    • 2.4L engine: 105-112 ft. lbs.
    • 2.5L engine:
      • Step 1: 28-34 ft. lbs.
      • Step 2: Tighten an additional 60 degrees

Cylinder Head

  • Cylinder Head Bolts*:
    • 2.4L engine:
      • Step 1: 22 ft. lbs.
      • Step 2: 59 ft. lbs.
      • Step 3: Loosen all bolts completely
      • Step 4: 18-25 ft. lbs.
      • Step 5: Tighten an additional 90 degrees
    • 2.5L engine:
      • 2002-2004 models:
        • Step 1: 72 ft. lbs.
        • Step 2: Loosen all bolts completely
        • Step 3: 26-32 ft. lbs.
        • Step 4: Tighten an additional 75 degrees
        • Step 5: Tighten an additional 75 degrees
      • 2005 model:
        • Step 1: 37 ft. lbs.
        • Step 2: Tighten an additional 60 degrees
        • Step 3: Loosen all bolts completely
        • Step 4: 26-32 ft. lbs.
        • Step 5: Tighten an additional 75 degrees
        • Step 6: Tighten an additional 75 degrees
      • 2006 model:
        • Step 1: 72 ft. lbs.
        • Step 2: Loosen all bolts completely
        • Step 3: 29 ft. lbs.
        • Step 4: Tighten an additional 75 degrees
        • Step 5: Tighten an additional 75 degrees
  • Main Bearing Cap Bolts*:
    • 2.4L engine: 34-41 ft. lbs.
    • 2.5L engine:
      • Step 1 (bolts 1-10): 27-31 ft. lbs.
      • Step 2 (bolts 1-10): Tighten an additional 60 degrees
      • Step 3 (bolts 11-22): 15-18 ft. lbs.
  • Connecting Rod Cap Nuts:
    • 2.4L engine:
      • Step 1: 120-144 inch-pounds
      • Step 2: Tighten an additional 60-65 degrees
    • 2.5L engine:
      • Step 1: 14-15 ft. lbs.
      • Step 2: Tighten an additional 90 degrees

*Bolts must be replaced!

Driveaxle

  • Driveaxle/Hub Nut: 174-230 inch-pounds (~14-19 ft. lbs.)
  • Driveaxle Support Bearing Retainer Bolts: 108-168 inch-pounds
  • Driveaxle Support Bearing Bracket-to-Engine Block Bolts: 19-26 ft. lbs.

Drivebelt

  • Drivebelt Tensioner Mounting Bolts:
    • 2.4L engine: 24-28 ft. lbs.
    • 2.5L engine: 15-17 ft. lbs.

Engine Mount

  • Engine Mount Bolts/Nuts:
    • 2.4L engine:
      • Engine mount through-bolts: 47-55 ft. lbs.
      • Engine mount-to-block bolts: 22-29 ft. lbs.
    • 2.5L engine:
      • Left (transaxle) and right engine mounts through-bolts: 32-40 ft. lbs.
        • Engine mount bolts/nuts:
          • Nuts: 37-43 ft. lbs.
          • Bolts: 54-66 ft. lbs.
      • Front and rear engine mounts:
        • Through-bolts: 56-72 ft. lbs.
        • Engine mount bolts/nuts: 61-72 ft. lbs.
  • Engine Mount-to-Crossmember Bolts (2.4L engine): 47-55 ft. lbs.
  • Engine Mounting Bracket Bolts (2.5L engine): 32-40 ft. lbs.
  • WT Cover Bolts (2.5L engine): 108-120 inch-pounds
  • Engine Front Cover Bolts:
    • 2.4L engine:
      • Small bolts: 57-66 inch-pounds
      • Large bolts: 144-168 inch-pounds

Exhaust

  • Exhaust Manifold-to-Block Nuts/Bolts:
    • 2.4L engine: 27-35 ft. lbs.
    • 2.5L engine: 29-32 ft. lbs.
  • EGR Valve-to-Base Mounting Bolts:
    • 1993-2001 models: 144-168 inch-pounds
  • EGR Base Mounting Assembly to Intake Manifold:
    • 1993-2001 models: 144-168 inch-pounds
  • Exhaust Manifold Brace Bolts: 32 ft. lbs.
  • Exhaust Manifold Heat Shield Bolts: 9 ft. lbs. (108 inch-pounds)
  • Exhaust Pipe-to-Exhaust Manifold Bolts: 15-25 ft. lbs.

Flywheel/Driveplate

  • Flywheel/Driveplate Bolts:
    • 2.4L engine: 105-112 ft. lbs.
    • 2.5L engine: 76-83 ft. lbs.
  • Balance Shaft Assembly Bolts (Vibration Dampener)*:
    • 2.5L engine:
      • Step 1: 34-37 ft. lbs.
      • Step 2: Tighten an additional 90 degrees
      • Step 3: Loosen all bolts completely
      • Step 4: 34-37 ft. lbs.
      • Step 5: Tighten an additional 90 degrees

*Bolts must be replaced!

Fuel

  • Fuel Rail Mounting Bolts/Nuts:
    • 2.4L engine: 144-168 inch-pounds
    • 2.5L engine:
      • Step 1: 83-95 inch-pounds
      • Step 2: 16-19 ft. lbs.
  • Fuel Pressure Regulator Mounting Screws:
    • 1993-2001 models: 48-60 inch-pounds
  • Injector Cover Mounting Screws:
    • 1993-2001 models: 48-60 inch-pounds
  • Throttle Body Mounting Bolts (use cross pattern):
    • Step 1: 72-96 inch-pounds
    • Step 2: 156-192 inch-pounds
  • Spark Plugs: 14-22 ft. lbs.

Intake

  • Intake Mainfold Nuts/Bolts:
    • Intake Manifold Collector:
      • 2.4L engine: 12-14 ft. lbs.
      • 2.5L engine: 13-15 ft. lbs.
    • Lower Intake Manifold:
      • 2.4L engine: 12-14 ft. lbs.
      • 2.5L engine: 13-15 ft. lbs.
  • IVT (Intake Valve Timing) Solenoid Mounting Bolts (2.5L engine): 48-64 inch-pounds

Oil

  • Oil Pump Pressure Relief Valve Bolt:
    • 2.4L engine: 29-43 ft. lbs.
    • 2.5L engine: 29-50 ft. lbs.
  • Oil Pump-to-Front Cover Bolts:
    • 2.4L engine: 144-180 inch-pounds
    • 2.5L engine: 60-65 inch-pounds
  • Oil Pump-to-Front Cover Screws (2.4L engine): 52-68 inch-pounds
  • Oil Pick-Up to Block Bolts:
    • 2.4L engine: 12-15 ft. lbs.
    • 2.5L engine: 15-19 ft. lbs.
  • Oil Pan:
    • Aluminum section-to-block:
      • Large bolts:
        • 2.4L engine: 144-168 inch-pounds
        • 2.5L engine: 15-17 ft. lbs.
      • Small bolts/nuts:
        • 2.4L engine: 56-66 inch-pounds
        • 2.5L engine: 72-94 inch-pounds
    • Steel pan-to-aluminum section: 56-66 inch-pounds
    • Drain Plug: 22-29 ft. lbs.

Thermostat

  • Thermostat Housing Bolts:
    • 1993-2001 models: 56-66 inch-pounds
    • 2002-2006 models: 16-20 ft. lbs.

Timing Chain

  • Timing Chain Components (2.4L engine):
    • Timing chain tensioner arm bolts: 108-168 inch-pounds
    • Timing chain lower guide bolts: 108-168 inch-pounds
    • Lower timing chain tensioner bolts: 56-66 inch-pounds
    • Upper timing chain tensioner bolts: 144-168 inch-pounds
    • Idler sprocket bolt: 48-61 ft. lbs.
  • Timing Chain Components (2.5L engine):
    • Timing chain slack guide bolts: 144-156 inch-pounds
    • Timing chain guide bolts: 144-156 inch-pounds
    • Timing chain tensioner bolts: 57-66 inch-pounds
    • Balance shaft (vibration dampener) chain tensioner bolts: 57-66 inch-pounds

Transaxle

  • Automatic Transaxle Drain Plug: 22-29 ft. lbs.
  • Manual Transaxle Drain and Filler Plugs:
    • 1993-2001 models: 14-22 ft. lbs.
    • 2002-2006 models: 23-28 ft. lbs.
  • Engine-to-Transaxle Bolts:
    • 1993-2001 models:
      • Transaxle-to-engine block bolts: 29-36 ft. lbs.
      • Transaxle-to-oil pan bolts: 22-30 ft. lbs.
  • Transaxle Mounting Bolts
    • 2002-2006 models:
      • 4-cylinder 5-speed and all 6-speed models:
        • Bolt numbers 1, 6, 7, 8, 9 and 10: 22-29 ft. lbs.
        • Bolt numbers 2, 3, 4 and 5: 52-59 ft. lbs.
  • Back-up Light Switch: 30 ft. lbs.
  • Shift Cable-to-Firewall Mounting Bolts: ~4 ft. lbs. (44 inch-pounds)
  • Shift Lever Mounting Bolts: 9 ft. lbs. (108 inch-pounds)
  • Transaxle Case Protector Mounting Bolts: 13 ft. lbs. (156 inch-pounds)

Valve cover

  • Valve Cover Bolts/Nuts:
    • 2.4L engine:
      • Step 1: 35 inch-pounds
      • Step 2: 69-95 inch-pounds
    • 2.5L engine:
      • Step 1: 9-26 inch-pounds
      • Step 2: 65-82 inch-pounds

Water pump

  • Water Control Valve Housing Bolts: 16-20 ft. lbs.
  • Water Pump-to-Engine Bolts:
    • 1993-2001 models:
      • 6mm bolts: 56-66 inch-pounds
      • 8mm bolts: 144-168 inch-pounds
    • 2002-2006 models:
      • 2.5L engine: 16-20 ft. lbs.

Engine (3.5L six-cylinder)

Torque specs not listed under 3.5L default to the specs listed in 4-cylinder (see above)

Popular Torque Specs

Oil Drain Plug: 22-29 ft. lbs.
Oil Filter: Hand Tight
Transmission Drain Plug:
Wheel Lug Nuts: 72-87 ft. lbs.
Spark Plugs: 14-22 ft. lbs.

Camshaft

  • Camshaft Sprocket Bolts: 73-78 ft. lbs.
  • Camshaft Bearing Cap Bolts:
    • Step 1 (Tighten the number 1 bearing cap bolts [13-16] first, then follow the tightening sequence): 17 inch-pounds
    • Step 2: 52 inch-pounds
    • Step 3: 80-104 inch-pounds

Clutch

  • Clutch Master Cylinder Retaining Nuts:
    • 1993 – 2001 models: 72-96 inch-pounds
    • 2002 – 2006 models: 108-144 inch-pounds
  • Clutch Release Cylinder Retaining Bolts: 22-30 ft. lbs.
  • Clutch Release Cylinder Bleeder Screw: 51-86 inch-pounds
  • Clutch Pressure Plate-to-Flywheel Bolts:
    • 1993 – 2001 models: 16-22 ft. lbs.
    • 2002 – 2006 models:
      • Step 1: 84-168 inch-pounds
      • Step 2: 26-32 ft. lbs.

Crankshaft

  • Crankshaft Pulley Bolt:
    • 2002-2005 models:
      • Step 1: 28-34 ft. lbs.
      • Step 2: tighten an additional 60 degrees
    • 2006 model:
      • Step 1: 32 ft. lbs.
      • Step 2: Tighten an additional 60 degrees

Cylinder Head

  • Cylinder Head Bolts*:
    • Step 1: 72 ft. lbs.
    • Step 2: Loosen all bolts completely (in reverse of tightening sequence)
    • Step 3: 26-32 ft. lbs.
    • Step 4: Tighten all bolts an additional 90-95 degrees
    • Step 5:Tighten all bolts an additional 90-95 degrees
  • Main Bearing Cap Bolts*:
    • Step 1: 24-28 ft. lbs.
    • Step 2: Tighten an additional 90 degrees
  • Connecting Rod Cap Nuts:
    • Step 1: 14-15 ft. lbs.
    • Step 2: Tighten an additional 90 degrees

*Bolts must be replaced!

Driveaxle

  • Driveaxle/Hub Nut: 174-230 inch-pounds (~14-19 ft. lbs.)
  • Driveaxle Support Bearing Retainer Bolts: 108-168 inch-pounds
  • Driveaxle Support Bearing Bracket-to-Engine Block Bolts: 19-26 ft. lbs.

Drivebelt

  • Drivebelt Tensioner Mounting Bolts: 26 ft. lbs.

Engine Mount

  • Engine Mount Bolts/Nuts:
    • Left (transaxle) and right engine mounts:
      • Through-bolts: 32-40 ft. lbs.
      • Engine mounts bolts/nuts:
        • Mount-to-transaxle bolts: 32-40 ft. lbs.
        • Mount-to-frame bolts: 54-62 ft. lbs.
    • Front and rear engine mounts:
      • Through-bolts: 56-72 ft. lbs.
      • Engine mount nuts: 32-40 ft. lbs.

Exhaust

  • Exhaust Manifold Nuts: 21-24 ft. lbs.
  • Exhaust Manifold Heat Shield Bolts: 45-57 inch-pounds

Flywheel/Driveplate

  • Flywheel/Driveplate Bolts: 61-69 ft. lbs.

Fuel

  • Fuel Rail Mounting Bolts/Nuts:
    • Step 1: 78-92 inch-pounds
    • Step 2: 16-19 ft. lbs.

Intake

  • Intake Manifold:
    • Intake manifold collector: 13-15 ft. lbs.
    • Upper intake manifold: 13-15 ft. lbs.
    • Lower intake manifold
      • Step 1: 44-66 inch-pounds
      • Step 2: 20-23 ft. lbs.

Oil

  • Oil Cooler Connector Bolt: 33-39 ft. lbs.
  • Oil Pan Bolts:
    • Upper (aluminum) oil pan:
      • 1993-2004 models: 144-168 inch-pounds
      • 2005-2006 models: 168-216 inch-pounds
    • Lower (steel) oil pan: 64-94 inch-pounds
    • Oil pan-to-transaxle: 31-38 ft. lbs.
  • Oil Pan Drain Plug: 22-29 ft. lbs.
  • Oil Pan Rear Cover Mounting Plate: 57-65 inch-pounds
  • Oil Pick-Up Tube Mounting Bolts: 15-16 ft. lbs.
  • Oil Pressure Switch: 96-156 inch-pounds
  • Oil Pump Mounting Bolts: 75-95 inch-pounds
  • Oil Pump Cover Screws: 50-65 inch-pounds
  • Rear Main Oil Seal Retainer Bolts: 72-82 inch-pounds

Thermostat

  • Thermostat Housing Bolts:
    • 1993-2001 models: 56-66 inch-pounds
    • 2002-2006 models: 74-99 inch-pounds

Timing Chain

  • Front Timing Chain Cover Bolts:
    • 6mm: 105-120 inch-pounds
    • 8mm: 19-23 ft. lbs.
  • Variable Valve Timing Cover Bolts: 87-112 inch-pounds
  • Upper Timing Chain Guide Bolts: 61-82 inch-pounds
  • Main Timing Chain Tensioner Bolts: 61-82 inch-pounds
  • Main Timing Chain Guide Pivot Bolt: 120-166 inch-pounds
  • Secondary Timing Chain Tensioner Bolts: 61-82 inch-pounds

Transaxle (Manual)

  • Transaxle Mounting Bolts
    • 2002-2006 models:
      • 5-speed with 3.5L models:
        • Bolt numbers 1, 2, 3, 4, 5 and 6: 52-59 ft. lbs.
        • Bolt numbers 7, 8, 9 and 10: 22-29 ft. lbs.

Transaxle (Automatic)

  • Driveplate-to-Torque Converter Bolts: 33 – 43 ft. lbs.
  • Transaxle-to-Engine Bolts:
    • 1993 – 2001 models:
      • Transaxle-to-Engine Block Bolts: 29-36 ft. lbs.
      • Starter Motor Bolts: 22-27 ft. lbs.
      • Rear Engine Mount Bracket-to-Transaxle Bolt: 54-61 ft. lbs.
      • Oil Pan-to-Transaxle Bolts: 22-27 ft. lbs.
  • Transaxle Mounting Bolts (2002 and later models):
    • 2002 – 2004 models:
      • Bolt numbers 1, 2 and 3: 52-58 ft. lbs.
      • Bolt numbers 4: 58-72 ft. lbs.
    • 2005 – 2006 4-speed models:
      • Bolt numbers 1 and 3: 55 ft. lbs.
      • Bolt numbers 2 and 6: 26 ft. lbs.
      • Bolt numbers 4 and 5: 32 ft. lbs.
    • 2005 – 2006 5-speed models:
      • Bolt numbers 1 and 3: 52-58 ft. lbs.
      • Bolt number 2: 31-38 ft. lbs.

Valve Cover

  • Valve Cover Bolts:
    • Step 1: 9-26 inch-pounds
    • Step 2: 61-82 inch-pounds

Water Pump

  • Water Pump-to-Engine Bolts: 75-95 inch-pounds

Suspension – Front

  • Control Arm:
    • Rear Bushing Clamp:
      • Nut: 97-117 ft. lbs.
      • Bolts:
        • 1993 – 2001 models: 29-36 ft. lbs.
        • 2002 models: 97-117 ft. lbs.
        • 2003 – 2006 models: 93-112 ft. lbs.
    • Pivot Bolt/Nut:
      • 1993 – 1994 models: 65-87 ft. lbs.
      • 1995 – 2001 models: 87-108 ft. lbs.
      • 2002 models: 92-114 ft. lbs.
      • 2003 – 2006 models: 67-88 ft. lbs.
    • Control Arm-to-Steering Knuckle Balljoint Nut: 52-64 ft. lbs.
  • Stabilizer Bar:
    • Link-to-Stabilizer Bar Nut:
      • 1993 – 2001 models: 144-192 inch-pounds
      • 2002 models: 30-36 ft. lbs.
      • 2003 – 2006 models: 59-72 ft. lbs.
    • Link-to-Control Arm Nut:
      • 1993 – 2001 models: 30-35 ft. lbs.
    • Link-to-Strut Nut:
      • 2002 models: 30-36 ft. lbs.
      • 2003 – 2006 models: 59-72 ft. lbs.
    • Bushing Clamp Bolts:
      • 1993 – 1994 models: 144-192 inch-pounds
      • 1995 – 2001 models: 30-36 ft. lbs.
      • 2002 – 2006 models: 34-40 ft. lbs.
  • Strut/Coil Spring Assembly:
    • Strut-to-Knuckle Bolts/Nuts:
      • 1993 – 1997 models: 87-108 ft. lbs.
      • 1998 – 2001 models: 123-137 ft. lbs.
      • 2002 – 2006 models: 93-114 ft. lbs.
    • Strut-to-Body Upper Mounting Nuts:
      • 1993 – 2001 models: 29-40 ft. lbs.
      • 2002 models: 13-16 ft. lbs.
      • 2003 – 2006 models: 31-37 ft. lbs.
    • Piston Rod Nut:
      • 1993 – 2001 models: 43-58 ft. lbs.
      • 2002 models: 13-17 ft. lbs.
      • 2003 – 2006 models: 44-65 ft. lbs.
  • Subframe (front):
    • Subframe Support Bolts:
      • 1993 – 2002 models: 29-36 ft. lbs.
      • 2003 – 2006 models: 11-16 ft. lbs.
    • Subframe Mounting Nuts:
      • 1993 – 2001 models: 97-117 ft. lbs.
      • 2002 models: 72-87 ft. lbs.
      • 2003 – 2006 models: 98-116 ft. lbs.

Suspension – Rear

  • 1993 – 2001 models:
    • Brake Backing Plate-to-Rear Knuckle Bolts: 29-38 ft. lbs.
    • Hub and Bearing Assembly Retaining Nut: 138-188 ft. lbs.
    • Rear Suspension Arms:
      • Lateral Links:
        • Lateral Link-to-Suspension Member Nuts: 72-87 ft. lbs.
        • Lateral Link-to-Rear Knuckle Nuts: 62-72 ft. lbs.
      • Radius Rod Bolts/Nuts (both ends): 62-72 ft. lbs.
    • Stabilizer Bar:
      • Stabilizer Bushing Clamp Nuts: 30-35 ft. lbs.
      • Stabilizer-to-Connecting Rod Nuts: 30-35 ft. lbs.
      • Stabilizer Connecting Rod-to-Strut Nuts: 30-35 ft. lbs.
    • Strut/Coil Spring Assembly:
      • Strut-to-Rear Knuckle Nuts: 87-108 ft. lbs.
      • Strut-to-Body Upper Mounting Nuts: 31-40 ft. lbs.
      • Piston Rod Nut: 43-58 ft. lbs.
  • 2002 – 2006 models:
    • Radius Rod-to-Center Member Bolt: 89-103 ft. lbs.
    • Radius Rod-to-Knuckle Bolt/Nut: 48-59 ft. lbs.
    • Suspension Arms:
      • Upper Suspension Arm Pivot Bolt-to-Center Member Nuts:
        • 2002 models: 60-73 ft. lbs.
        • 2003 – 2006 models: 48-59 ft. lbs.
      • Upper Suspension Arm-to-Knuckle Nut: 65-78 ft. lbs.
      • Lower Rear Suspension Arm-to-Center Member Nut:
        • 2002 models: 52-66 ft. lbs.
        • 2003 – 2006 models: 48-59 ft. lbs.
      • Lower Rear Suspension Arm-to-Knuckle Bolt/Nut:
        • 2002 models: 81-88 ft. lbs.
        • 2003 – 2006 models: 48-59 ft. lbs.
      • Lower Front Suspension Arm-to-Knuckle Nut/Bolt: 60-73 ft. lbs.
      • Lower Front Suspension Arm-to-Center Member Nut/Bolt: 60-73 ft. lbs.
    • Shock Absorber:
      • Shock Absorber Mount-to-Body Nuts:
        • 2002 models: 144-156 inch-pounds
        • 2003 – 2006 models: 15-18 ft. lbs.
      • Shock Absorber-to-Knuckle Bolt/Nut: 74-88 ft. lbs.
      • Shock Absorber Mount-to-Shock Nut: 20-24 ft. lbs.
    • Stabilizer Bar:
      • Stabilizer Bushing Clamp Bolts:
        • 2002 models: 22-29 ft. lbs.
        • 2003 – 2006 models: 20-24 ft. lbs.
      • Stabilizer-to-Link Rod Nuts: 37-44 ft. lbs.
      • Link Rod-to-Bracket Nut: 37-44 ft. lbs.
    • Hub and Bearing-to-Knuckle Bolts: 58-72 ft. lbs.

Steering

  • Airbag Module Torx Bolts:
    • 1993 – 2001 models: 132-216 inch-pounds
    • 2002 – 2006 models: 71-115 inch-pounds
  • Power Steering Pump Pressure Line Banjo Bolt: 36-51 ft. lbs.
  • Steering Gear Mounting Bracket Bolts/Nuts:
    • 1993 – 2001 models: 54-72 ft. lbs.
    • 2002 models: 100-121 ft. lbs.
    • 2003 – 2006 models: 82-103 ft. lbs.
  • Steering Wheel Nut: 22-29 ft. lbs.
  • Tie-Rod End-to-Steering Knuckle Nut:
    • 1993-1997 models: 22-29 ft. lbs.
    • 1998 – 2001 models: 22-36 ft. lbs.
    • 2002 – 2006 models: 22-28 ft. lbs.

Wheels

  • Lug Nuts: 72-87 ft. lbs.